Adjustment of Clay Grinding Roller

The clay grinding roller is a fine crushing equipment and used to further clay crush and other raw materials which has been coarse or middle crushed. The final materials particle size ≤2mm. Both ends of the fine roller crusher are equipped with regulating pinched security block which are used to protect rolling circle and equipment.

This grinding roller can be widely used in cement, metallurgy, chemical, electric power and coal industries for processing the brittle and tenacious materials. In brick making production line, this machine is mainly used for secondary crushing, which can make the particle size of clay, coal ash or shale, etc less more than 3 mm.

Adjustment of clay grinding roller for discharging material size: The wedge-shaped or gasket control is installed between two roll wheels. There is adjusting bolt in the top of the control. The wedge makes the active roll wheel away from fixable wheel, while the adjusting bolt is pulling up the wedge, this make the gap in the two roll wheels and discharging materials size larger. When the wedge is pulled down, the active roll wheel under the action of holddown spring makes the gap and discharging become smaller. The gasket control trough regulates the quantity or thickness of the gasket to adjust the size of discharging materials.

Homepage/ http://www.wdbrickmachine.com
E-mail/ seven@cnwdmachine.com