Maintenance and Repair of Brick Slitter

Automatic brick slittercutting blanks in vacuum extruder for clay cutting, preform machine extruded clay.

Cutting machine cutting blanks on the structure of the graph view, whether we can think of in production, cut billet cutting machine maintenance and repair work should be carried out in order to prolong its life?

1,Wire of brick slitter: the production, when the wire is broken to a make a lot of frequent headaches brick, steel quality directly affects the quality of the cut blanks, it ultimately affects the quality of the production of bricks, then how in the production of steel wire should be maintained?
First, cut billet machine mud from the initial raw material, then the raw material crushing and processing plant for raw materials should be careful cleaning, such as the use of separator, drum sieve and other equipment will be contained in a variety of materials fine particle removal. Second, is the top choice in the selection of steel wire. Third, the choice of wire springs, choose greater elasticity of the spring in order to have a hard particles occurs, to ensure that the spring in the elastic range, to protect the wire is not pulled off in production. Fourth, because of regional differences, such as raw materials in the gravel and mortar are more difficult to remove when you should increase the diameter of the wire, the wire to ensure that production can play its due role. Fifth. Appropriate to increase the inclination of the wire, to ensure the wire, the wire to reduce the force.

2, Brick slitter out of control, pushing billet continuous movement of the head, there are several reasons for this situation and solutions.
(1)The pressure is insufficient or the control rod failure;
(2)A rotary member driven shaft inertia, resulting in loss of control of the clutch; pad
(3) And the control rod of the clutch wear;
(3)The control lever movement within the guide groove inflexibility; improper
(4)Operate the pedals too long, loose from the block can not be reset.

Solution:
(1)To adjust the spring position or replace the spring;
(2)To reduce the eccentric cam lifting or to add brake;
(3)Adding shims or replace loose in the slot from the block;
(4)Repair lever or guide grooves;
(5) To reduce pedal time, using the correct method of operation.

Homepage/ http://www.wdbrickmachine.com
E-mail/ seven@cnwdmachine.com